Kleinsub V3 carbon - Convex

Let, stærk og fleksibel - 100% carbon

 

Når vi designer og producerer vores V3-modeller, er der flere ting, du ikke kan se med det blotte øje.

Vi fremstiller vores finner af mange forskellige lag af kulfibre med forskellige egenskaber for at opnå et stærkt og fleksibelt finneblad. For at binde alle fiberlag sammen bruger vi en specielt udviklet epoxy. Det er en videreudvikling af en epoxytype, som anvendes i vindmølleindustrien til rotorblade. Resultatet er et let, stærkt og fleksibelt blad af 100% kulfiber.

 

 

Farve Carbon black

Form Convex

Fodlomme Pathos Fireblade fodlommer

Mål med fodlommer størrelse 42-44 ~ 980 mm lang x 206 mm bred

Vinkel på finneblad 23 grader

Design Halvcirkel

Hårdhed supersoft (SS), soft (S), soft / medium (SM), medium (M), medium / hard (MD).

Rails farve Hvid

Vandskinner størrelse 14 mm

Vægt 1100 g inklusiv Pathos fodlomme størrelse 42-44.

 

Vi anbefaler at du bruger hårdhed:

SOFT under 75 kg

SOFT/MEDIUM 75-85 kg

MEDIUM 80-90 kg

MEDIUM/HARD 90-100 kg

HARD over 100 kg

Dette er kun vejledende, da der er mange faktorer som gøre sig gældende når du vælger hårdheden på dine finner.

Kleinsub V3 carbon - Convex

kr 2.145,00Pris
  • EU skostørrelser

    Pathos fodlommestørrelse

    34 36/38 35 36/38 36 38/40 37 38/40 38 40/42 39 40/42 40 42/44 41 42/44 42 44/46 43 44/46 44 46/48 45 46/48 46 48/50 47 48/50

    Vi har baseret vores størrelsesguide på EU-skostørrelse og 5 mm neopren sokker. Hvis du ikke bruger neopren sok eller max 1-2 mm neopren sokker. Anbefaler vi at du går en fodlommestørrelse ned.

    Hvis du er i tvivl om, hvilken størrelse du skal vælge, er du velkommen til at kontakte os og lade os guide dig.

  • The V3 Carbon fins are specifically designed for spearfishing and freediving. Our V3 model is made of many thin layers of fiber to achieve a fluid transition between each single layer of fiber. We have designed the blades with a very hard sole and a soft and flexible fin tip. For each blade different types of fiber, with different properties and weaves, are used to produce a blade that is flexible and hardy.

     

    We use a specially developed epoxy, which is a further development of an  epoxy type which is used in the wind turbine industry for rotor blades. This makes it very flexible and able to withstand extremely harsh conditions.

     

    Water rails are very important to create effective momentum. Our water rails are made of high quality silicone rubber, and will not curls curl when pressed together or stretched out, which optimize the water flow and keeps the water on the blade for efficient progress. Water rails have two functions, to protect the blade and to keep the water on the blade.

     

    For all our fins, we have chosen to use Pathos fireblades foot pockets. The foot pocket has ultra thin tendons which allows optimal energy transfer and not loosing power while maintaining minimal foot pocket weight. The foot pockets is glued to the blade, and is not removable. 

     

    Pathos fireblades are one of the lightest foot pockets on the market, just 370 grams for a size 40/42. The footpocket is made by three different mixtures of pure latex in order to be soft on toes and heel, medium on the side nerves allowing the blade to move freely and hard on metatarsals and the bottom of the foot for stability. The footpocket are made of 100% pure recycled latex, and has a very wide range of size, from 36/38 and up to size 48/50.